3L 5L Bottlled Water Filler With Rinsing Filling Capping 3in1
Monoblock Machine
General Description:
This product is a kind of 3-in-1 unit water filling machinery for
producing potable drinking water like pure water, mineral water
etc.The device incorporates rinsing, filling and capping into one
and is a kind of full-automatic equipment. It is suitable for
producing PET and plastic bottled mineral water and purified water.
The method of filling adopts gravity or micro-pressure filling
which makes the filling velocity faster and more stable. Therefore,
compared with similar products, this device has features of higher
output and bigger benefits. The equipment is fitted with advanced
Mitsubishi programmable PLC to control the operation and cooperated
by frequency converter of the main motor; it makes the operation
more stable and reliable. The photoelectric sensor is used to
detect operating conditions of each section, which makes the
operation of this equipment highly automatic and convenient.
Technical Parameters:
| Model | CGF4-4-1 | CGF6-6-1 | CGF8-8-4 | CGF10-10-5 | CGF16-16-4 | CGF25-25-5 | CGF32-32-6 |
Capacity (bph/5L) | 500 | 750 | 1000 | 1200 | 2000 | 3000 | 4000 |
Main features
1. Bottle infeed
2. Rinser
The rotary wheel is a fully SUS304 stainless steel welded
structure.
The machine applies unique overturning bottle clamp, which is an
innovation of our company. This bottle clamp grips bottle at neck
position, avoiding bottle mouth thread contamination caused by
rubber gripper block of a traditional bottle clamp. Made of SUS304
stainless steel, this bottle clamp is hygienic and durable.
The high efficiency atomizing spay nozzle installed on bottle clamp
is capable of cleaning any part of bottle inner wall, and also
saves rinsing water.
All sliding bushes of lifting device use Igus (Germany)
anti-corrosion maintenance free bearing.
The rinser is driven by driving system positioned inside machine
frame via gear transmission.
3. Filler
Rotary wheel fully made of stainless steel SUS 304.
Gravity filling method.
Filling valves are made of SUS304.
Filling valves are reasonably structured with accurate filling.
Bottles go up and down in the function of cam through elevator, to
process filling with contact to bottle-mouth.
Level of cylinder is controlled with float-ball.
Filler is driven through gears inside the machine frame.
Link-wheels in rinser, filler and capper are transported in ringed
support of bottle-neck.
4. Capper
Cap distributing chute is equipped with reverse cap stop and
reverse cap pick-out mechanism which have a photocell switch to
stop the capper when there is no cap inside the chute.
The capper is equipped with inlet bottle detection switch.
Centrifugal way of cap arranging is adopted to reduce damage of
caps.
5.Main configuration
Touch screen: Mitsubishi, Thinget or Weinview
PLC program controller: Mitsubishi or Omron
Inverter: Mitsubishi or Omron
Photoelectrical controller: AUTONICS
Other electrical components: Schneider
Pneumatic component: Airtac
Pump: Nanfang
