Cgf Model Full Automatic Mineral Pure Water Rinsing Filling Capping
Machine
Specifications:
Material: SUS304 or SUS316
Control: PLC+Touch screen
Bottle volume: 3-5L
Advantages: automaitc control, high speed, easy operation
Features:
i. This machine has speed regulating motor so that the production
capacity can be adjusted according to customer requirement easily.
ii. Fixed structure, impeccable controlling system and easily for
operating and maintain.
iii. All our filling accessory have been well polished, and have
nice appearance , fast filling speed, without any leakage;
iv. When change the bottles, only need to change the starwheel and
guide plate, no other machine accessory need to change.
Function:
| (1) The water bottling machine has three functions for bottle
rinsing, filling and capping, which are composed in one body of the
machine . The whole process is full automatic. |
| (2) This machine is used in filling mineral water, drinking water,
flavor water, etc. in bottles made of polyester and plastics . |
| (3) The filling packaging operation is faster and more stable
because the micro pressure filling operation of the new type is
adopted . There the output and benefit of the machine is higher
than the machinery of the same specifications . |
Technical Parameters:
| Model | CGF4-4-1 | CGF6-6-1 | CGF8-8-4 | CGF10-10-5 | CGF16-16-4 | CGF25-25-5 | CGF32-32-6 |
Capacity (bph/5L) | 500 | 750 | 1000 | 1200 | 2000 | 3000 | 4000 |
Main features
1. Bottle infeed
2. Rinser
The rotary wheel is a fully SUS304 stainless steel welded
structure.
The machine applies unique overturning bottle clamp, which is an
innovation of our company. This bottle clamp grips bottle at neck
position, avoiding bottle mouth thread contamination caused by
rubber gripper block of a traditional bottle clamp. Made of SUS304
stainless steel, this bottle clamp is hygienic and durable.
The high efficiency atomizing spay nozzle installed on bottle clamp
is capable of cleaning any part of bottle inner wall, and also
saves rinsing water.
All sliding bushes of lifting device use Igus (Germany)
anti-corrosion maintenance free bearing.
The rinser is driven by driving system positioned inside machine
frame via gear transmission.
3. Filler
Rotary wheel fully made of stainless steel SUS 304.
Gravity filling method.
Filling valves are made of SUS304.
Filling valves are reasonably structured with accurate filling.
Bottles go up and down in the function of cam through elevator, to
process filling with contact to bottle-mouth.
Level of cylinder is controlled with float-ball.
Filler is driven through gears inside the machine frame.
Link-wheels in rinser, filler and capper are transported in ringed
support of bottle-neck.
4. Capper
Cap distributing chute is equipped with reverse cap stop and
reverse cap pick-out mechanism which have a photocell switch to
stop the capper when there is no cap inside the chute.
The capper is equipped with inlet bottle detection switch.
Centrifugal way of cap arranging is adopted to reduce damage of
caps.
5.Main configuration
Touch screen: Mitsubishi, Thinget or Weinview
PLC program controller: Mitsubishi or Omron
Inverter: Mitsubishi or Omron
Photoelectrical controller: AUTONICS
Other electrical components: Schneider
Pneumatic component: Airtac
Pump: Nanfang
