CE Blowing Filling Capping Combiblock Machine For PET Bottle Water
Production
Applications:
It is applied to PET bottled pure water, carbonated soft drink,
juice, liquid dairy, liquid condiment and household & personal care
products, etc.
Blowing unit
High-speed blow valve group with high-speed network control ensures
blowing technic precision and unification.
Three-dimensional dynamic simulating design ensures exact and
reliable cam transmission and mesh.
High-pressure blow valve group optimum design helps save air a lot.
Quick-change for mould.
Wearable aluminum alloy mould surface with special treatment of
hardness.
Friendly man-machine interface.
Key points automatic lubrication.
Filling unit
High-speed and high-precision filling valve: 200ml/s, ±3mm.
Servo drive system
With CIP function
Capping unit
Magnetic constant torque, defective rate≤0.2%
Reversal caps ejecting device
No bottle, no feeding cap.
Product Range:
Production capacity from 12,000 BPH to 54,000 BPH.
Blowing-Filling-Capping-Combi Block Machinery Features:
1. Pre-form inlet controlling
2. Put pre-forms into hopper of auto sending device, send to
heating stove through belt and drum unit.
3. Bottle pre-form heating controlling The heating stove has
8-floors infrared lamp to heat pre-forms, the pre-forms run itself
and also the infrared lamp can be adjusted temperature
independently.
4. Heating stove has pre-form screw head cooling way and stove
ventilation and cool air duct, it ensures that pre-forms will not
be hard warmed.
5. Bottle pre-forms are sent to pre-form base by guide turn table,
the bases get pre-forms and then send to stove for heating one by
one.
6. Blowing technology controlling
7. Discharge warmed pre-forms to outlet guide by discharge pre-form
cover, put pre-forms into blowing moulds by manipulator, seal the
bottle mouth and extrude the body, also inlet two grade air
pressure(pre-blowing pressure and high pressure air) and make
pre-form to be bottles. According to the requirement of art, there
will inlet cooling water for moulds, all above processes are
controlled by main machine computer.
8. Bottle check and outlet
9. After blowing, the manipulator get bottles out of mould and the
qualified bottle will be send to guide, this guide can be connected
directly to filling line and also can connect to conveying chain,
send to bottle warehouse.
| NO. | Model | Capacity(based on 500ml) | Remark |
| 1 | 8-32-8 | 15,000bph | |
| 2 | 10-40-10 | 18,000bph | |
| 3 | 12-40-15 | 22,000bph | |
| 4 | 14-40-15 | 24,000bph | |
| 5 | 16-50-18 | 30,000bph | |
